Print E-mail
Ultra-sonic Cable Stripping Machine
 
http://www.temperature-house.com/images/stripper%20website.jpgThe New TET UCES-400 uses powerful pulses of Ultrasonic energy to strip the sheath from mineral insulated cable.

The ultrasonic energy transfers to the insulation on contact and de-compacts and liquefies the powder, which escapes from the end of the cable.

The result is that all the powder in the stripped section is cleanly removed leaving the conductors completely untouched.

The whole action is completed in seconds (in the case of small cables in a fraction of a second).

All cable sizes can be accommodated from 1.0mm (0.04”) to 6.0mm (or ¼”)
The only preparation needed prior to stripping is to ring through the sheath at
the break point (up to 25mm from the cable end).

The machine is supplied with a ringing tool and a pair of electronic side cutting
pliers for the smaller sizes.

There are four mechanisms affecting the stripping action;
1. Cable size
2. The length being stripped
3. Powder density (Supplier dependant)
4. ‘Grip’

UltrasonicCableStripper2UltrasonicCableStripper3

 Please click here to visit our newly formed website for more information on this product.